Farmhouse Log Cabin Simple Mobile Assembly Log Cabin Customization-0024

Short Description:

#Name:Farmhouse log cabin simple mobile assembly log cabin customization
#Brand:Yamazonhome
#Model number:Yamaj-0024
#Material:Larch
#Size: Customized
#Style:Modern simple
#Origin:Weifang,China
#Applicable occasions:Blockhouse,Wooden plywood


Product Detail

Product Tags

O1CN01vpICTa1amQI5lkyFA_!!3709813372-0-cib.jpg2

Chapter 1

For more than half a century, glulam has been widely used in Canada, and its fire safety has been recognized through extensive use and testing. Glulam is permitted and safe to expose because its large mass provides inherent fire resistance.

Chapter 2

Like many other wood products, glulam is naturally fire resistant because it will scorch. In the event of a fire, this char on the outside forms a protective layer while maintaining strength. This significantly slows the burn, allowing time to evacuate the building safely. Research on the fire resistance of glulam continues, with a focus on high-rise timber structures using glulam products.
LA-SEINE-MUS-196-895x530
1566523500720227

Chapter 3

From swimming pools and supermarkets to schools and high-rise buildings, glulam has been used in a wide variety of buildings in British Columbia for decades and continues to be durable, perform well and look great. At less than 10% the weight of steel and 1/5 the weight of concrete, glulam provides strength and flexibility.

Chapter 4

From large spans to towering structures, more and more projects use this strong, lightweight woodwork that has stood the test of time. Using glulam improves transport efficiency, reduces carbon footprint, and has a lighter structure with comparable strength.
46791606978572
1566523501714865

Chapter 5

Compared to concrete, glulam structures can be installed in less time, taking advantage of prefabrication throughout the year. Glulam can replace structural steel, providing twice the strength-to-weight ratio.

Chapter 6

Unique dimensions: Due to its high load capacity and low weight, glulam allows you to cover large areas with small parts. It can cover sections of up to 100 meters without intermediate supports.

O1CN01bSgcHT2Mm3Y6Ie0KT_!!2213229139869-0-cib
  1. The glulam structure is divided into two types: the plywood structure and the orthogonal glulam structure. Laminated glulam structures are mainly suitable for single- or multi-storey wooden structures with large spans and large spaces. Orthogonal glulam structures are mainly suitable for floor and roof structures, or single- or multi-layer box-type wood structure buildings composed of orthogonal glulam.
  2. The fiber direction of each ply of the plywood component should be consistent with the length of the component. The number of laminate layers in the section of the laminated glulam component shall not be less than 4 layers.
  3.  The directions of the fibers between the layers of the orthogonal glulam components should be stacked and orthogonal to each other. The number of layers of the cross-section should not be less than 3 layers, and it is not suitable for more than 9 layers, and the total thickness should not be greater than 500mm.
  4. When designing the laminated glulam components and orthogonal glulam components, the requirements for structural glue should be indicated according to the use environment, and the component manufacturers should strictly follow the design requirements for production.
  5. The design and construction requirements of the laminate-laminated timber structure should comply with the relevant requirements of the current national standard "Technical Specifications for Glued-Laminated Timber Structures" GB/T50708.
  6. The production requirements of the laminated wood structure should comply with the relevant provisions of the current national standard "Technical Specification for Glued Wood Structure" GB/T50708 and "Glulam for Structural Use" GB/T26899.
  7. The thickness t of the laminate is: 15mm≤t≤45mm; the size of the boards used for making cross-laminated wood should meet the following requirements: the width b of the laminate is: 80mm≤b≤250mm.
  8. Orthogonal glulam should be composed of boards of the same length and thickness of the same layer. The board can be lengthened with finger joints, and the strength of the finger joints should meet one of the following requirements: f t,j,k≥5+f tk m,j,k≥8+ f tk where; f t,j,k --Standard value of tensile strength of finger joints (N/mm2); f m,j,k--standard value of flexural strength in width direction of finger joints (N/mm2); f tk--standard of tensile strength of template value (N/mm2).
  9. Orthogonal glulam components can be used for floor panels, roof panels and wall panels, and the design of the components shall comply with the relevant provisions of Appendix G of this code.
  10. The length direction of the outer layer of orthogonal glulam should be arranged along the grain, and two layers of wood can be arranged along the grain as the outer layer. When required by the design, the cross-grain laminate can also be used in a two-ply plank configuration.
  11. Orthogonal glulam components can be connected by finger joints, and should meet the following requirements: when the components are finger-joined, the laminates of the cross-sections at both ends of the components at the finger joints should be arranged in the same way, and the grain direction of the components should be consistent accordingly; The finger joint length of the finger joint should not be less than 45mm.
  12. When the cross-laminated wood components are connected by finger joints, the strength of the finger joint joints shall be determined according to the following regulations: when the strength verification experiment at the finger joint joints of the components is carried out according to the relevant national experimental standards, the strength of the joints shall be determined. The standard value of flexural strength shall not be lower than the standard value of flexural strength of finger-jointed members required by the design; when the strength verification experiment at the finger-jointed joints of the members is not carried out, the design values of the flexural strength and tensile strength of the finger-jointed joints of the members shall be It can be taken as 67% of the value of the fingerless member, and the design value of the compressive strength is the same as that of the fingerless member.
  13. When the cross-laminated wood is glued, the surface of the board is smooth, free of dust, impurities, pollutants and other exuding substances that affect the bonding. After gluing, the laminate should be glued under pressure within the time specified by the adhesive used, and the glued surface should not be contaminated before gluing.
  14. The splicing surface between the outer parallel grain boards of the same layer with orthogonal glue is suitable for gluing with adhesive. Splicing can be adopted for the splicing surface between the inner side grain wood board of the same layer and the horizontal grain wood board of the same layer. However, the splicing gap should not be greater than 6mm.
  15. The adhesive used in cross-laminated wood should meet the requirements of strength and durability, and the type and performance requirements of the adhesive should comply with the relevant provisions of the current national standard "Technical Specifications for Glued Wood Structures" GB/T26899.
Company Profile

Modern Fashion Side Table Pet House with Door 0075

Shouguang Yamazon Home Materials Co.,Ltd was established in 2012, focusing on the production and processing of panel furniture in the early days. Our brand is Yamazonhome. The company is located at No. 300 Yuanfeng Street, Shouguang City, Shandong Province. The company covers an area of 12,000 square meters and has four fully automatic panel furniture production lines. It produces various panel furniture annually, such as wardrobes, bookcases, computer tables, coffee tables, dressing tables, cabinets, TV cabinets, sideboards and other types of panel furniture. . Focus on OEM production of furniture products. With the development of cross-border e-commerce, in order to meet the needs of customers to purchase furniture in China, our company has expanded the types of self-produced products, such as the processing and production of indoor sofas, powerlift recliner sofas, outdoor furniture, furniture materials plywood, Wooden semi-finished products,and pet furniture. At the same time, it provides procurement and inspection services of various types of furniture in China. Our company has professional furniture production talents and contacts in the furniture industry, and can provide customers with professional furniture production, procurement, and inspection services. Our core concept is to provide customers with professional customized furniture services. We welcome you to contact us to discuss cooperation in furniture products and furniture materials.
Timber Structure Glulam-0001

1 Years Coverage

After-Sales Services&Money Back Guarantee
After u get our furniture if it is damaged we would refund the full money to your account provided or we would delivery the new furniture to u in one week.

Please note: the warranty does not cover deliberate physical damage, severe moisture, or intentional damage.
* In addition, we also guarantee all of our products to be working when you receive them unless otherwise stated. Your satisfaction is important to us, so if your product is DOA (Dead On Arrival), let us know, and return it to us within 30 days of the date of purchase. We will send a replacement to you as soon as we receive your returned item (Costs associated with returning the items are not refundable. We will pay costs incurred in sending the replacement).
* Warranty will be void if products are misused, mishandled, or modified in any way.
* Restocking fees may be incurred in cases of refunds due to change of mind. For International buyers only
* Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. * Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
* Processing and Handling charges on return items are the buyer's responsibility. A refund will be issued as soon as is reasonably practicable and the customer will be provided with an e-mail notification. Refund only applies to the cost of the item Disclaimer
If you are pleased with your purchase, please share your experience with other buyers and leave us positive feedback. If you are dissatisfied with your purchase in any way, please talk to us first!
We are happy to help you solve any problem and if the situation calls for it, we will provide refunds or replacements.
We try to help our customers rectify any problem within reasonable limits.
Depending on the situation, we may still entertain warranty requests.


  • Previous:
  • Next:

  • Write your message here and send it to us
    • facebook
    • linkedin
    • twitter
    • youtube